Bitumen Based Coating Enamel Grade B
Bitumen Based Coating Enamel Grade B |
Price: RM 1650/-(EX-FACTORY in Paper Bags. Valid until 30/09/2015) |
Bitumen Based Coating Enamel is a bituminous compound reinforced with inert non-fibrous fillers for hot application. Type 2 a, b and c comply with BS 4147: 1980. It will soften gradually when heated and will change back to solid on cooling.
USAGE
Bitumen Based Coating Enamel is mainly used as anti-corrosion materials for protection of iron and steel pipes for industrial and drinking water.
TECHNICAL ADVANTAGES
- Excellent and permanent adhesion to metal
- Low water absorption
- Impact resistance
- Flexibility
- Resistance to soil stress
- Resistance to cold stress
- High electrical resistibility
-
Chemically stable
SPECIFICATIONS
CharacterisiticsGrade BTest MethodsFiller content by ignition , % by mass 25 to 35Appendix BDensity at 25°C, g/cm³ 1.2 to 1.4Appendix CSoftening point (Ring and Ball ), °C 115 to 130BS 2000:Part 58Penetration at 25°C, 10-1 mm 5 to 17Appendix DFlash point (Cleveland Open Cup), min., °C 260BS 4689Sag, max.,mm
60°C, 24 h
75°C, 24 h
-
1.5Appendix E
Bend at 0°C, min., mm 20Appendix FImpact Disbonded area, max., mm²
0°C
25°C
-
6500Appendix G
Peel, initial and delayed, max., mm
30°C
40°C
50°C
60°C
3.0
3.0
3.0
3.0Appendix H
APPLICATION AND HANDLING -
Surface Preparation
The surface of the steel pipe to be coated with Bitumen Based Coating Enamel shall
be wire-brushed to remove all surface rust, mill scale and loose materials. Immediately
after wire brushing the surface shall be wiped clean and dried, then apply a coat of
Bituminous Primer and allowed to dry. -
Application
Bitumen Based Coating Enamel shall be broken up into small pieces and heated
slowly to the application temperature of 220°C to 250°C, and should not be heated
to a temperature exceeding 270°C.
DRUMMING OPTIONS
(Grade A+) Brand New Drum
(Grade A) Recondition Drums .
External painted in Black
Internal washed and 100% cleaned
(Grade B) Recondition Drums .
External painted in Black
Internal containing 2 to 3 Kg
Foreign material .
(Grade C) Recondition Drums .
External unpainted .
Internal containing 2 to 3 Kg Foreign material .
PAPER PACKING
2 PLY PAPER BAG+1 PLY POLY BAG = 3 PLY PAPER BAGS IN NET WEIGHT 50/25 KGS BAGS