Bitumen Based Coating Enamel is a bituminous compound reinforced with inert non-fibrous fillers for hot application. Type 2 a, b and c comply with BS 4147: 1980. It will soften gradually when heated and will change back to solid on cooling.

USAGE
Bitumen Based Coating Enamel is mainly used as anti-corrosion materials for protection of iron and steel pipes for industrial and drinking water.

• Excellent And Permanent Adhesion To Metal


• Low Water Absorption


• Impact Resistance


• Flexibility


• Resistance To Soil Stress


• Resistance To Cold Stress


• High Electrical Resistibility


• Chemically Stable
  
  
  SPECIFICATIONS
  
  

  Characterisitics	Grade A	Test Methods
  Filler content by ignition , % by mass	25 to 35	Appendix B
  Density at 25°C, g/cm³	1.2 to 1.4	Appendix C
  Softening point (Ring and Ball ), °C	100 to 120	BS 2000:Part 58
  Penetration at 25°C, 10-1 mm	10 to 20	Appendix D
  Flash point (Cleveland Open Cup), min., °C	250	BS 4689
  Sag, max.,mm     60°C, 24 h     75°C, 24 h	1.5 -	Appendix E
  Bend at 0°C, min., mm	20	Appendix F
  Impact Disbonded area, max., mm²     0°C     25°C	15000 -	Appendix G
  Peel, initial and delayed, max., mm     30°C     40°C     50°C     60°C	3.0 3.0 3.0 3.0	Appendix H

  
  
  APPLICATION AND HANDLING

• Surface Preparation
       The surface of the steel pipe to be coated with Bitumen Based Coating Enamel shall
       be wire-brushed to remove all surface rust, mill scale and loose materials. Immediately
       after wire brushing the surface shall be wiped clean and dried, then apply a coat of
       Bituminous Primer and allowed to dry.



• Application
       Bitumen Based Coating Enamel shall be broken up into small pieces and heated
       slowly to the application temperature of 220°C to 250°C, and should not be heated
       to a temperature exceeding 270°C.
  
  
  DRUMMING OPTIONS
  (Grade A+) Brand New Drum
  
  (Grade A) Recondition Drums . 
  External painted in Black   
  Internal washed and 100% cleaned
  
  (Grade B) Recondition Drums .
  External painted in Black
  Internal containing 2 to 3 Kg
  Foreign material .
  
  (Grade C) Recondition Drums .
  External unpainted .
  Internal containing 2 to 3 Kg Foreign material .
  
  
  PAPER PACKING
  2 PLY PAPER BAG+1 PLY POLY BAG = 3 PLY PAPER BAGS IN NET WEIGHT 50/25 KGS BAGS